Maintaining Excavator Tracks

Excavator tracks undergo a great deal of wear and tear because of the added weight of the vehicle and the uneven terrain they are moved along. It is therefore necessary to maintain those tracks in the correct way to ensure that you get the most of the rubber track. Make sure to keep the following tips in mind for longevity and better productivity from excavator tracks.

Make sure the excavator tracks are always kept clean

When the work day has ended, the operators need to make sure that they clean the undercarriage from any sort of dirt and debris. If not cared for properly the buildup of dirt could eventually cause cracks to appear in the tracks. This would mean that the tracks won’t offer a smooth ride and would need to be sent for repairs. In order to clean the tracks equipment like shovels and water pipes work quiet well. Regular cleaning means that just a spray of water would be enough to get rid of any dirt embedded on the tracks.

If the tracks are used in cold water, the dirt build up can become a major issue if not attended on a regular basis. The dirt might freeze on the tracks and make movement difficult, plus I would also be difficult to get rid of the frozen dirt.

Carry out routine inspections

It is necessary to carry out routine inspections every now and then. This is because it’s always easier to attend to smaller area of damage instead of having to repair the complete excavator tracks. Operators should make sure they could check for any parts which look out of place during inspection. The rollers must be checked for oil spills. It is best to follow the maintenance guide lines offered in the user manual for excavator tracks.

Make sure of the following practices

  • Operators should ensure they take wider turns, this would allow the machine from becoming de tracked.
  • Operating the tracks on slopes can accelerate the wear and tear. Sometimes it’s difficult to avoid slopes, in this case care must be taken to ensure a smooth and bump free ride without sudden turns and jerks.
  • Tracks might continue to wear down when used on rough surfaces over a period of time.
  • Care must be taken to choose the correct shoe width. The narrow ones work well for softer surfaces like soil while wider ones work well on concrete floor as well.

Maintaining proper traction

Failing to use the correct traction can cause the tracks to wear down faster than usual. When the machine is being operated in soft soil its necessary to keep the track tension a little looser and vice versa for more solid grounds.

When using track it’s always better to use rubber tracks because of the good flotation which they offer. Plus rubber track are easier on the ground and are prone to less wear and tear.

If you are looking for the best variety of rubber tracks available in Sydney, make sure you visit an online retailer.